Absorbent Pads - PPI Logo1 Absorbent Pads - PPI Logo2
Absorbent Pads - Contact Details Absorbent Pads - Email Us
Absorbent Pads - PPI Home
Absorbent Pads - Absorbent Products
Absorbent Pads - Services
Absorbent Pads - Download
Absorbent Pads - Contact Us
Mycelx™
PPI Services – NSW Distributor
of Mycelx

Absorbent Pads - Mycelx Logo

For distributors of Mycelx in other States please contact Environmental Waste Services

Absorbent Pads - EWS Logo

Associate of PPI Services

Absorbent Pads - Baldwin Logo

Absorbent Pads

Synthetic Absorbent Pads and Sorbents

PPI Services offers an extensive range of synthetic absorbent pads and products made from materials such as polymers and polypropylene.

Oil Blotter (A610)

A610 is a granulated polymer that solidifies petroleum-based liquids into large bonded pieces providing waste minimisation. A610 does not bond to or absorb water and therefore works well on hydrocarbon-based spills such as oils, fuels, solvents and oil-based paints on both land and water. A610 bonds with little increase in volume ensuring minimal waste for disposal. The desired degree of solidification and the viscosity of the liquid being bonded determines the amount of product required. Five hundred grams of A610 will bond 7.5 kg of liquid. A610 is certified as incinerable to less than 0.02% ash.

Absorbent Pads
  ITEM # DESCRIPTION UNIT ABSORPTION (kg/liquid) TYPE
Granules 44001 A610 300 gm Shaker 4.5
  44002 A610 1 kg Bucket 15
  44003 A610 6 kg Bucket 90
  44004 A610 18 kg Drum 270

General Purpose   Oil Only (will not absorb water)   Universal (hazardous chemicals)

MRO Plus Sorbents

Available in absorbent pads and rolls, MRO Plus is a general purpose or universal sorbent, highly effective for clean up and removal of most oil and water based liquids. MRO Plus is manufactured from a high strength, grey dimpled material which combines thickness, durability, high absorbency and low linting. Perforations permit the use of precisely the right amount and the products dark dirt-masking colour enables longer use before disposal. Incineration residue is less than 0.2 % ash by weight. The MRO Plus is manufactured by ultrasonically bonding 2 thin sheets on top and below of a thicker sheet – thus giving it a triple layer effect. The outer two layers are for protecting the sorbent and minimising the lint where as the “inner” thicker sheet provides the absorption.

Absorbent Pads
  ITEM # DESCRIPTION UNIT ABSORPTION (litres) TYPE
Pads MRO100 41 x 51 cm Bale/100 190
Rolls MRO15-DP 38 cm x 30.5 m Roll 94
  MRO30 76 cm x 30.5 m Roll 189

General Purpose   Oil Only (will not absorb water)   Universal (hazardous chemicals)

Universal Plus Sorbent

Available in absorbent pads and rolls, Universal Plus is a specially developed chemical sorbent with properties that make it ideal for clean-up of hazardous or aggressive chemicals. A surfactant-treated polypropylene, Universal Plus absorbs up to 16 times its weight in chemicals, water or oil. Versatile and cost effective, Universal Plus can be used on a range of chemicals including hydrofluoric acid. Its fast wicking action minimises the problems of hazmat spills. Universal Plus is chemically inert, so it will not react with aggressive fluids.

Absorbent Pads
  ITEM # DESCRIPTION UNIT ABSORPTION (litres) TYPE
Pads UN1113 28 x 33 cm Bale/50 79
  UN1719 41 x 51 cm Box/100 91

General Purpose   Oil Only (will not absorb water)   Universal (hazardous chemicals)

UXT Universal “Xtra Tough” Sorbent

UXT is a high performance, all purpose product, outstanding in its ability to handle hazardous materials in maintenance, repair and operational environments. UXT is oleophilic (hydrocarbon attracting) and hydrophilic (water absorbing), making it highly effective against oil, acids, solvents, bases, chemicals, coolants and antifreeze. Perforation ensures that you use only the amount needed for the job.

Absorbent Pads Absorbent Pads
  ITEM # DESCRIPTION UNIT ABSORPTION (litres) TYPE
Roll UXT505 13 cm x 30 .5 m Roll 57

General Purpose   Oil Only (will not absorb water)   Universal (hazardous chemicals)

Battlemat

Battlemat is unique in the sorbent market and is available in both general purpose/universal and oil only. Battlemat is perfect as a walk-on mat or as single use, clean-up sorbents in manufacturing plants and similar environments. The durable, abrasion-resistant upper layer draws liquid into the centre of the product whilst the more impervious lower layer prevents liquids from seeping through to the floor, thus making Battlemat the floor mat of choice wherever there is overspray or heavy traffic. The camouflage pattern also masks drips and spills thereby ensuring longevity. An extremely cost-effective product that incinerates to 0.02% ash.

Absorbent Pads
  ITEM # DESCRIPTION UNIT ABSORPTION (litres) TYPE
Rolls BM15 38 cm x 46 m Bale 106
  BM30X 76 cm x 46 m Bale 216
  OBM30X 76 cm x 46 m Bale 216

General Purpose   Oil Only (will not absorb water)   Universal (hazardous chemicals)

Sorbent Industrial Rugs (SIR)

Made of durable, needle punched, polypropylene fibres, the SIR absorbs 10-12 times its weight in oil, water or chemicals. For high traffic areas and workstations - prevents slippery areas and eliminates unsightly tracking between plant and office. SIR can stand up to the most aggressive chemicals.

Absorbent Pads
  ITEM # DESCRIPTION UNIT ABSORPTION (litres) TYPE
Rolls SIR36 92 cm x 91.5 m Bale 106
  SIR72 183 cm x 45.7 m Bale 106

General Purpose   Oil Only (will not absorb water)   Universal (hazardous chemicals)

Barrier Spill Matting (BSM)

Made of needle punched, polypropylene fibres, BSM is designed with a unique three-ply construction that prevents fluids from penetrating to the floor and provides the best non-slip surface available. BSM absorbs oil, water and chemicals. As further assurance of worker safety, the BSM also resists curling and buckling.

Absorbent Pads
  ITEM # DESCRIPTION UNIT ABSORPTION (litres) TYPE
Rolls BSM150 92 cm x 45.7 m Bale 142

General Purpose   Oil Only (will not absorb water)   Universal (hazardous chemicals)

ENV Oil Sorbents

Available in absorbent pads and rolls, ENV Oil Sorbents are a relatively new product and represent the most economical of the polypropylene sorbents available. ENV oil sorbents are packed in distinctive green bags, and are an obvious choice when cost is the overwhelming factor governing selection. ENV sorbents are ideal for environmental applications such as spill clean-up.

Absorbent Pads
  ITEM # DESCRIPTION UNIT ABSORPTION (litres) TYPE
Pads ENV100 41 x 51 cm Bale/100 125
  ENV200 41 x 51 cm Bale/200 140  
Rolls ENV810 20CM x 3M Bale/4 267

General Purpose   Oil Only (will not absorb water)   Universal (hazardous chemicals)

SPC Oil Sorbents

SPC Oil Sorbents are convenient, lightweight, cost-effective and are capable of absorbing up to 25 times their own weight in fuels and oils. Additionally, they are equally effective in soaking up petroleum based solvents and paints, vegetable oils and other non-water soluble chemicals. SPC Oil Sorbents will not absorb water, will float, and are wringable and dustless, unaffected by normal temperature, flame resistant and impervious to both rot and mildew. SPC is the next grade up in quality from the ENV range. SPC is manufactured using the same technology as ENV, however the sorbents are ultrasonically bonded to improve strength and reduce lint. This style of absorbent pad is common to a number of manufacturers, however SPC has the added advantage of being perforated which means that you only use as much of the pad or roll as you need.

  ITEM # DESCRIPTION UNIT ABSORPTION (litres) TYPE
Pillows SPC10B 36 cm x 64cm Bale/10 80
Pads SPC105B 38 cm X 48 cm Bale/100 136
  SPC200 41 x 51 cm Bale/200 140
  SPC50B 84 cm x 100 cm Bale/50 136
Booms SPC820 20 cm x 6 m Bale/2 267
  SPC810 20 cm x 3 m Bale/4 267
  SPC510 13 cm x 3 m Bale/4 121
Bilge Boom SPC818B 20 cm x 45cm Bale/10 50
Rolls SPC155 96 cm x 44 m Bale/1 273
  SPC152 48 cm x 44 m Bale/2 273

General Purpose   Oil Only (will not absorb water)   Universal (hazardous chemicals)


Absorbent Pads

Oil Plus

Available in absorbent pads and rolls, Oil Plus is highly effective in absorbing oil and petroleum products. Oil Plus is constructed from a heavyweight, dimpled material notable for its low linting, thickness and strength. Oil Plus will not pick up water. Suitable for industrial and environmental applications, Oil Plus is perforated which means that you only use as much of the absorbent pads or rolls as you need. Easily disposed of, Oil Plus is incinerable and leaves less than 0.02% ash. Oil Plus is regarded as one of the best oil only sorbents available on the market.

  ITEM # DESCRIPTION UNIT ABSORPTION (litres) TYPE
Pads OP100 41 x 51 cm
Bale/100 114
Rolls OP15-DP 38 cm x 46 m Bale/1 95
  OP30 76 cm x 46 m Bale/1 190

General Purpose   Oil Only (will not absorb water)   Universal (hazardous chemicals)
Absorbent Pads Absorbent Pads

Pillows

Absorbent pillows are excellent for absorbing spills and leaking fluids in restricted circumstances and under persistent drip sources. Choices include: Allwik for absorption of oil, water and chemicals; Oil Only for use in waste troughs, coolant tanks, fluid reservoirs and sump wells; and Hazwik, intended for use with hazardous materials.

Absorbent Pads
  ITEM # DESCRIPTION UNIT ABSORPTION (litres) TYPE
Allwik AW1818 46 x 46 cm Box/16 79
  AW99 23 x 23 cm Box/32 106
Oil Only OIL1818 46 x 46 cm Box/16 79
  OIL99 23 x 23 cm Box/32 106
Hazwik HAZ1818 46 x 46 cm Box/16 79
  HAZ99 23 x 23 cm Box/32 106

General Purpose   Oil Only (will not absorb water)   Universal (hazardous chemicals)

Drum Top Covers

Drum top covers are pre-cut to fit 205 litre drums with one or two bung holes. They prevent pump drips from reaching the floor, and keep drum tops and drum storage areas clean. Available in Allwik for oil, water, and chemicals and Oil Only for oil and petroleum based liquids.

Absorbent Pads
  ITEM # DESCRIPTION UNIT ABSORPTION (litres) TYPE
Allwik DTA25 56 cm dia. Box/25 34
Oil Only DTO25 56 cm dia. Box/25 34

General Purpose   Oil Only (will not absorb water)   Universal (hazardous chemicals)

Socks

PPI Services offers a wide array of polypropylene socks which can be used to mould around corners and conform to uneven surfaces to prevent and soak up spills and drips. These products are available in a variety of types and sizes. Socks are an everyday working tool for major industries, including chemical plants, heavy and light manufacturing, transportation, printing, and public utilities. Choices include: Allwik which is an all-purpose maintenance sock with moderate chemical resistance that makes it suitable for most industrial applications; Oil Only that will not absorb water or water-based solutions; and Hazwik for use with aggressive fluids. All socks are wringable, incinerable and disposable to landfill depending upon their application.

  ITEM # DESCRIPTION UNIT ABSORPTION (litres) TYPE
Allwik AW412 7.6 cm x 1.22 m Box/12 45
  AW806 7.6 cm x 2.44 m Box/6 45
  AW124 7.6 cm x 3.66 m Box/4 45
Oil Only OIL412 7.6 cm x 1.22 m Box/12 45
  OIL806 7.6 cm x 2.44 m Box/6 45
  OIL124 7.6 cm x 3.66 m Box/4 45
Hazwik HAZ412 7.6 cm x 1.22 m Box/12 45
  HAZ124 7.6 cm x 3.66 m Box/4 45

General Purpose   Oil Only (will not absorb water)   Universal (hazardous chemicals)

Absorbent Pads

Railway Track Matting

  • Used to absorb oil, fuels and other hydrocarbon based fluids from trains in railway yards, maintenance centres whilst repelling water.
  • Heavy duty poly backing prevents leakage· Suitable for a wide range of indoor and outdoor applications.
  • Suitable for a wide range of indoor and outdoor applications.
Absorbent Pads
  ITEM # DESCRIPTION UNIT ABSORPTION (litres) TYPE
Track Matting CE-8330 1.45m x 50 m With PE Backing 1/Bag 300
  CE-8331 45cm x 50m 2/Bag 200
  CL-8330 1.45m x 50 m Without PE Backing 1/Bag 300

General Purpose   Oil Only (will not absorb water)   Universal (hazardous chemicals)

Rolls & Absorbent Pads

  ITEM # DESCRIPTION UNIT ABSORPTION (litres) TYPE
Rolls          
Oil Only MB 200 PF 200gsm White 96cm x 50m 1/roll 280
General Purpose MB 200 HPF 200gsm Yellow 96cm x 50m 1/roll 280
General Purpose MB 400 HPF 400gsm Yellow 96cm x 50m 1/roll 300

  ITEM # DESCRIPTION UNIT ABSORPTION (litres) TYPE
Pads          
Oil Only MB 200 200gsm White 43cm x48cm Bale/200 140
Oil Only MB 400 400gsm White 43cm x48cm Bale/100 130
General Purpose MB 200 HYP 200gsm Yellow43cm x48cm Bale/200 140
  MB 400 HYP 400gsm Yellow43cm x48cm Bale/100 130

General Purpose   Oil Only (will not absorb water)   Universal (hazardous chemicals)

Browse the full range of absorbent products, suitable for and environmental pollution and oil spill control.


“Choose the experienced team at PPI for all your oil absorbent pads and products.”